Cable conductor test headsets
Cable wire test headsets and test headphones
Here you will find our headsets and headphones for cable wire location with voice communication, as well as test headphones for the telecommunications industry.
Our cable wire testers are used to establish a two-wire voice connection from the start of the cable to the end of the cable or any point where the individual wires are accessible, such as joints or distributors. In addition to two-way communication, the third wire (test wire) can be used to perform connection tests between the two points. Connections are indicated immediately and without delay by visual and acoustic signals. It is irrelevant whether the communication wires are active or inactive telecommunications lines and whether terminal devices are connected or not. Depending on the connection method, short circuits, earth faults, interruptions and swaps, etc. can be located. The built-in signal transmitter, which can be activated from any location, ensures that the voice wire pair can be quickly located at the remote station.
TT3000 cable core tester with remote headset
Successor or alternative model to KAP-1-Light
The TT3000 can also be used for line tracing in conjunction with a test headset.
Loop resistance for voice connection up to 10 kΩ
Corresponds to a voice line length of 140 km with Cu Ø 0.8 mm
Line resistance of the wire to be tested up to 100 kΩ
Easy to find the remote station thanks to search tone mode
Remote station can be called using the call button
Individual volume adjustment
Polarity-independent connection of the voice line
Can also be used on connected telecommunications lines
Immediate visual and acoustic indication during connection testing
External voltage resistant up to 100 V AC/DC
Very good voice transmission
Battery operation with 3x 1.5 V micro AAA or rechargeable battery operation possible
Connection of more than two devices possible
Two TT3000 units are required to establish a voice and test connection!
Item no.: TT-604-05
TT3004 cable tester integrated into the headset
Successor or alternative model to KAP-1
Loop resistance of the voice line max. 10 kΩ
Line resistance of the wire to be tested up to 2 kΩ
Easy to find the remote station thanks to search tone mode
Remote station can be called using the call button
Individual volume adjustment
Polarity-independent connection of the voice line
Voice operation also possible on active telecommunications lines
Immediate visual and acoustic indication during connection testing
External voltage resistance up to 100 V AC/DC; briefly up to 230 V AC/DC
Very good voice transmission
3 x 1.5 V AA batteries in the headphone housing
Connection of several TT3004 possible
Compatible with TT3000, 3003 and KAPG 100
Item no.: TT-604-06
